Head, Air Filter, Nozzle Shaft, Nozzle:
The places to pay attention to are: whether the filter core itself is clean, deformed and damaged
Note the following: The Buffer is smooth
Note the following: Whether the O-Ring is damaged
Things to look out for are: Leaf Spring deformation
Points to note are: Whether the nose is cracked or stained with tin
Note the following: The Buffer is normal
X: Ball Screw X: ball screw
Pay attention to: whether the surface is dusty
Pay attention to: whether the surface is dusty
Y: Straight guide rails
Pay attention to: whether the surface is dusty
Pay attention to: whether the surface is dusty
z-axis
Pay attention to: whether the surface is dusty
Pay attention to: whether the surface is dusty
w-axis
Track belt
Places to pay attention to are: whether the surface is stained with dust or there are parts
Things to look for: tightness
Things to look for: tightness
Solenoid valve
Places to pay attention to are: whether the solenoid valve has a role
Points to note are: Whether the Air Joint is damaged
Note: Whether there are parts on the Feeder Plate
Visual system
The places to pay attention to are: there is no dust in the lens
Points to note are: Whether the signal line is connected properly
Points to note are: LED brightness
Places to pay attention to are: whether there is dust on the LED
The places to pay attention to are: there is no dust in the lens
Points to note are: Whether the signal line is connected properly
Points to note are: LED brightness
Places to pay attention to are: whether there is dust on the LED
The places to pay attention to are: there is no dust in the lens
Points to note are: Whether the signal line is connected properly
Points to note are: LED brightness
Places to pay attention to are: whether there is dust on the LED
Leaf Spring: Check whether Leaf Spring is deformed and replace it if necessary
Feeder Plate: Check whether there are parts on the Feeder Plate
Multi Vision Camera: Checks the lens for dust or parts
Single Vision Camera: Check the lens for dust or parts
Nozzle Shaft: checks whether the Buffer is smooth. If no, nozzle shaft. You can put some lube on
Moving Camera: Check the lens for dust
X-axis -Ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil
X-axis linear slide: Check whether the surface is stained with dust or parts, and clean it if necessary; Fresh oil
Ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil
Y-axis linear slide: Check whether the surface is stained with dust or parts, and clean up if necessary; Fresh oil
Z-ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil
Z-axis linear slide to check whether the surface is stained with dust or parts, if necessary to clean; Fresh oil
W-ball Screw: Check whether the surface is stained with dust or parts, clean up if necessary; Fresh oil
Air Joint: Check whether the internal Y-Packing and O-Ring are deformed, and replace them if necessary
Nozzle Shaft: Check whether the O-Ring on the Shaft is deformed. If yes, nozzle shaft is deformed. Please replace it
Moving Camera LED Lighting: Adjust the LED brightness, if can not be adjusted, please replace the LED Light device
X-axis -Ball Screw: clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand
X-axis linear slide: Clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand
Y-ball Screw: clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand
Y-axis linear slide clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand
Z-axis -Ball Screw: clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand
Z-axis linear slide: Clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand
W-ball Screw: Clean the surface dust, parts and old oil, and re-apply a thin layer of oil by hand
Feeder Valve: Press the red envelope button on the solenoid valve and see if it works properly
Track conveyor belt: Check whether the belt is broken, adjust the tightness, and replace it if necessary